| Specification | 18×18×47 |
| Mounting | Non-Flushed(S01,S02two sensing point) |
| Sensing distance | 2mm±10% |
| Set distance | 0~1.6mm |
| Hysteresis error | 3~10% of sensing distance |
| Repeat accuracy | Less than 5% of sensing distance |
| Output mode | NPN/PNP |
| Output state | NO/NC |
| Response frequency | 1KHz |
| Standard target | Φ12X1t Q235A（FE360） |
| Temperature effect | -40℃～＋85℃, less than 10% of sensing distance at ＋23℃ |
| Power supply | DC12-24V impulse(p-p)＜10%(DC10-30V) |
| Current consumption | ＜25mA |
| Residual voltage | 2V load current 150mA＆cable 2m |
| Load current | ＜150mA |
| Circuit protection | Reverse connection protection, short circuit protection >150 mA |
| Indicator light | LED power: Green, Output 1:Yellow, Output 2:Red |
| Leakage current | Anti-Magnetic lnterence >100mT |
| Connection | S01,S02 wire（0.1m），power module connector M12X1 |
| Ambient temperature | Work＆store：-40℃~80℃ |
| Ambient humidity | Work＆store：35~95% |
| Anti-vibration | 10~55Hz, fluctuation amplitude 1.5mm,X,Y,Z(2H) |
| Insulation resistance | ＞50MΩ（DC500V megger) between current-carrying parts and case |
| Protection degree | IEC IP67 |
| Housing | PA66+20%GF |