Specification | 18×18×47 |
Mounting | Non-Flushed(S01,S02two sensing point) |
Sensing distance | 2mm±10% |
Set distance | 0~1.6mm |
Hysteresis error | 3~10% of sensing distance |
Repeat accuracy | Less than 5% of sensing distance |
Output mode | NPN/PNP |
Output state | NO/NC |
Response frequency | 1KHz |
Standard target | Φ12X1t Q235A(FE360) |
Temperature effect | -40℃~+85℃, less than 10% of sensing distance at +23℃ |
Power supply | DC12-24V impulse(p-p)<10%(DC10-30V) |
Current consumption | <25mA |
Residual voltage | 2V load current 150mA&cable 2m |
Load current | <150mA |
Circuit protection | Reverse connection protection ,short Circuit Protection >150mA |
Indicator light | LED power: Green, Output 1:Yellow, Output 2:Red |
Leakage current | Anti-Magnetic lnterence >100mT |
Connection | S01,S02 wire(0.1m),power module connector M12X1 |
Ambient temperature | Work&store:-40℃~80℃ |
Ambient humidity | Work&store:35~95% |
Anti-vibration | 10~55Hz,fluctuation amplitude1.5mm,X,Y,Z(2H) |
Insulation resistance | >50MΩ(DC500V megger) between current-carrying parts and case |
Protection degree | IEC IP67 |
Housing | PA66+20%GF |