| Specification | M30 |
| Mounting Flushed | Non-Flushed |
| Sensing distance | 30mm±10% |
| Set distance | 0~24mm |
| Response frequency | 0.1KHZ |
| Standard target | 90X90X1t(Q235A) |
| Output Type | N：NPN NA：NPN-NO NB：NPN-NC P：PNP PA：PNP-NO PB：PNP-NC |
| Hysteresis error | 1~15% of sensing distance |
| Repeat accuracy | Less than 3% of sensing distance |
| Power supply | DC 10-60V |
| Current consumption | ＜15mA |
| Leakage current | ＜100uA |
| Residual voltage | Less than 2.5V( load current at 200mA) |
| Load current | ≤200mA |
| Circuit protection | Reverse connection protection,output short circuit protection, electrical surge absorption
|
| Indicator light | Yellow LED |
| Connection | M12 Connector |
| Ambient temperature | work and store：-40℃~+85℃ |
| Temperature effect | Between -40℃～＋85℃, less than 10% of sensing distance at ＋23℃ |
| Ambient humidity | work and store：35~95%RH |
| Voltage effect | ＜3% |
| Anti-vibration | 10 to 55 Hz with a 1.5 mm double amplitude for 2H each in X, Y, and Z directions |
| Withstanding voltage | 1000V AC，50/60Hz 1min between current-carrying parts and case |
| Insulation resistance | ＞20MΩ(DC 500V) between current-carrying parts and case |
| Protection degree | IEC IP67/IP68 |
| Housing | Nickel-copper alloy |