| Sensing mode | u type through beam reflection |
| number of optical axis | 1optical axis |
| Sensing material | Ф5mm |
| Output mode | Dark ON |
| sensitivity adjustment | fixed |
| slot width | 30mm |
| repeatability | Perpendicular to the test axis: 0.5mm以下 |
| Power supply | DC10-30V |
| Current consumption | 25mA |
| Response Time | 1ms |
| Output control |
NPN collector open circuit output Maximum inflow current: 100mA Applied voltage: below 30V DC (between output and 0V) Residual voltage: below 2.5V (when the inflow current is 100mA) |
| Circuit protection | Power supply reverse connection protection, output short circuit protection, over-current protection circuit, mutual interference prevention function |
| Indicator light | Action indicator: red, power indicator: green |
| Light source | Infrared light(850nm) |
| insulation impedance | 50MΩ以上（DC500V |
| Automatic anti-interference function | equipment |
| Withstand voltage | 1,500VAC,50/60Hz 1min |
| Anti-vibration | 10 ～ 55 Hz dual amplitude 1.5mm x, y, z direction 2H |
| Anti-impact | 500m / S2 (50g) 3 times in X, y, z directions |
| Ambient illumination | Sunlight: 100klx incandescent lamp: 5klx (illuminance of light receiving surface) |
| Ambient temperature | work:-25℃～＋55℃,iced forbidden/30～80% RH dewde forbidden |
| Ambient humidity | store:-35℃～＋85℃,iced forbidden/35～95% RH dewde forbidden |
| Protection degree | IEC IP67 |
| Connection | Cable 2m-PVC |
| Housing material | Hosing: PBT+ABS |