| Specification | 18×10×30 |
| Mounting | Flushed |
| Sensing distance | 5mm±10% |
| Set distance | 0~4mm |
| Output mode | NPN/PNP |
| Output state | NO/NC |
| Hysteresis error | 1~15% of sensing distance |
| Repeat accuracy | Less than 3% of sensing distance |
| Response frequency | 0.5KHz |
| Standard target | 18X18X1t(Q235A) |
| Temperature effect | -25℃~70℃,within±10%（+25℃ sensing distance） |
| Power supply | DC12-24V impulse(p-p)＜10%(DC10-30V) |
| Current consumption | ＜10mA |
| Voltage effect | ＜3% |
| Residual voltage | ＜2V(load current 200mA＆cable 2m） |
| Load current | ＜200mA |
| Circuit protection | Reverse Connection protection,Short circuit protection,electrical surge absorption |
| Indicat light | Red LED |
| Leakage current | ＜100uA |
| Connection | Cable（2m）or Connection terminal |
| Ambient temperature | Work＆store：-25℃~70℃ |
| Ambient humidity | Work＆store：35~95% |
| Anti-vibration | 10~55Hz,Amplitude 1.5mm,X,Y,Z(2H) |
| Withstanding voltage | 1000V AC，50/60Hz 1min |
| Insulation resistance | ＞50MΩ（DC500V megger） |
| Protection degree | IEC IP67 |
| Housing | ABS |