| Number of optical axes | 8 |
| Protection Height | 320mm |
| response time | 8ms |
| Sensing distanc | 0.1~10m |
| Output mode | 2*NPN、2*PNP |
| Minimum detectable Object | 50mm Opaque Object |
| Light Source | 850nm infrared LED |
| Operating Voltageg | 24V DC ±10% |
| Pitch Optional | 40mm |
| Output Current | 250mA Max |
| Power consumption | Emitter : 2W , Receiver : 3W |
| Recovery | Manual Reset 、Auto Reset optical |
| Circuit Protection | Short-circuit protection, reverse connection protection，Output Load protection |
| Indicator Light | Power LED:Green,Operation LED: Red； Digital Tube: diagnostic display, stability display |
| Connection | Cable 2m /M12 Connector |
| Ambient temperature | Work:-25℃~+55℃ store:-40℃~+70℃,iced forbidden |
| Ambient Humidity | Work:35~85%RH store:35~95%RH,dewde forbidden |
| Ambient illumination | lamplight:<5,000Lx(Receives light) |
| Withstand Voltage | AC1000VAC,50/60Hz 1min |
| Insulation resistance | 20MΩ以上(DC500Vmegger) |
| Anti-Vibration | 10～55 Hz, double-amplitude 1.5mm ,X,Y,Z( 2H)/ |
| Protection degree | IEC IP67 |
| Installation mode | End cover with mounting hole |
| Housing material | Shell: aluminum alloy (yellow), light filter: PMMA, end cover: engineering plastic |
| EMC | IEC61496/IEC61496-2 type2 |