| Model | SST18X-02DNA | SST18X-02DPA
|
| Output mode | NPN | PNP |
| Output state | NO*2 | NO*2 |
| Power supply | 10〜30V DC |
| Current consumption | <30mA |
| Sensing distance | 2mm±10% |
| Set distance | 0〜1.6mm |
| Standard target | 8X8X1mm（Iron sheet） |
| Response frequency | 1kHz |
| Repeat accuracy | ＜3%（Sensing distance） |
| Temperature effect | -40~85℃, within ±10% of sensing distance at 23℃ |
| Hysteresis error | 1%〜15%（Sensing distance） |
| Load current | <150mA |
| Residual voltage | ≤2.5V (Load current:150mA , 2m wire) |
| Indicator light | Power indicator: Green LED, Output 1: Yellow LED, Output 2: Red LED |
| Circuit protection | Reverse polarity connection protection, short-circuit protection |
| Ambient temperature | Work&Storage：-40℃〜＋85℃ |
| Ambient humidity | Work&Storage: 35〜95%（No dew condensation or icing allowed) |
| Withstand voltage | 1000 VAC, 50/60 Hz, 1 min |
| Insulation resistance | ＞50MΩ（DC500V megger）between current-carrying parts and case |
| Anti-vibration | 10~55Hz, double amplitude 1.5mm, X, Y, Z axes, 2h |
| Anti-impact | 3 shocks of 500 m/s² (approx. 50 G) in X, Y and Z axes |
| Protection degree | IEC IP65 |
| Connection | O, C wires extended (0.1m), power module connector: M12×1 |
| Material | PA66,PP |