| Type | Single-distance Non-flushed |
| Model | SN08Y-02DNA-E2 | SN08Y-02DPA-E2 | SN08Y-02DNB-E2 | SN08Y-02DPB-E2 |
| Sensing distance | 2mm±10% |
| Set distance | 0〜1.6mm |
| Standard target | 8X8X1mm（Iron sheet） |
| Response frequency | 1KHz |
| Repeat accuracy | ＜3%（Sensing distance） |
| Type | Double-distance Non-flushed |
| Model | SN08Y-04DNA-E2 | SN08Y-04DPA-E2 | SN08Y-04DNB-E2 | SN08Y-04DPB-E2 |
| Sensing distance | 4mm±10% |
| Set distance | 0〜3.2mm |
| Standard target | 12X12X1mm（Iron sheet） |
| Response frequency | 1KHz |
| Repeat accuracy | ＜5%(Sensing distance) |
| Output mode | NPN | PNP | NPN | PNP |
| Output state | NO | NO | NC | NC |
| Hysteresis error | 1%〜15%(Sensing distance) |
| Current consumption | <15mA |
| Power supply | 10〜30V DC |
| Load current | <100mA |
| Residual voltage | <2V (Load current: 100mA , 2m cable) |
| Indicator light | Yellow LED |
| Circuit protection | reverse connection protection ，short-circuit protection，surge absorption |
| Temperature effect | -25℃~70℃ ±10% of sensing distance at +23℃ |
| Ambient temperature | Work&Storage：-25~＋70℃ |
| Ambient humidity | Work&Storage: 35〜95% |
| Withstand voltage | 500V AC,50/60Hz 1min between current-carrying part and case |
| Insulation resistance | >20MΩ（DC500V） between current-carrying part and case |
| Anti-vibration | 10~55Hz，amplitude 1.5mm for 2H in X,Y,Z directions |
| Anti-impact | 500m/s² for X,Y,Z directions (50G) 3 times |
| Protection degree | IEC IP67 |
| Connection | Connector M8 |
| Material | Front | PBT |
| Housing | Stainless steel |
| Connector | M8：PA66 Pins: Copper plated with gold |