| Port | EtherCAT | 2 × M8, 4-pin female connector |
| Power Connector | 2 × M12 L-code 5-pin male / female connector |
| I/O Connection Method | 8 × M12, 5-pin female connector, A-code |
| Input Parameters | Number of Input Channels | 8 Channels |
| Input Signals | 3-wire NPN / 2-wire passive signal |
| Input Voltage | 0V |
| Input Current | Per channel < 200mA, short-circuit protection |
| Switching Threshold | IEC 61131-2 |
| Input Delay | 25μs |
| Switching Frequency | ≤250Hz |
Output Params | Output Channels | 8 Channels |
Output Voltage | 0VDC (24VDC Potential Group) |
| Channel Output Current | 0.3A, Short-circuit protection |
| Load Type | Resistive, Inductive, Lamp load |
| Synchronization Factor | 1 |
| Switching Frequency | ≤250Hz |
| Max. Output Current | 0.6A/ch |
| Basic Specifications | Rated Operating Voltage | 18～30VDC |
| Power Loss | Max. 80mA |
| Protection Rating | IP65 |
| Operating Temperature | -30℃~70℃ |
| Storage Temperature | -40℃~85℃ |
| LED Diagnostic Indicators | PWR | Green: Power normal; Red: Power fault |
| LINKIn/LINKout Port | Green: Physical connection normal; Green flashing: Expansion communication normal |
| RUN | Green: Module operating normally; OFF: Module not active |
| I/O Port | Green: Active; OFF: Inactive |