| Output mode | Reed switch contact |
| NC Contact Qty | 2（NC） |
| Switch on safety distance | 9mm |
| Switch off safety distance | 20mm |
| Switch voltage | 10-30V DC |
| Switch current | 100mA max |
| Contact capacity | 10W |
| Mechanical life | Switching operations: 2×10⁷ |
| Structure type | Structure type3（EN ISO 13849） |
| Actuator coding level | Low coding level（EN ISO 13849） |
| Safety state in the event of a fault | The switch is without internal detection and cannot assume a safe state in the event of a fault.Fault detection is performed by the connected post-installed safety-related logic unit. |
| Connection | M8-4Pin(Connector) |
| Ambient temperature | Work&Storage:-20℃~+60℃ |
| Ambient humidity | Work&Storage:35~95%RH |
| Anti-vibration | 10~50Hz, double amplitude 1.5mm, 2 hours per axis for X, Y, Z |
| Anti-impact | 30G,11ms |
| Insulation resistance | ＞100MΩ(DC500V) |
| Protection degree | IEC IP67 |
| Housing material | PPS |