| Light Axis Spacing | 40mm |
| Minimum Detectable Object | ≥50mm（Opaque object） |
| Detection Distance | 0.1~10mm |
| Output Type | 2*NPN、2*PNP |
| Light Source | Infrared light 850nm |
| Safety-related Characteristic Parameters | Type | Type 2 |
| Safety Integrity Level | SIL 2 |
| Performance Level | PL d |
| Operating Voltage | 24VDC±20% |
| Maximum Output Current | 250mA Max |
| Power Consumption | Transmitter: 2W, Receiver: 3W |
| Reset Method | Manual/Auto selectable |
| Circuit Protection | Power polarity protection, output short circuit protection, output overload protection |
| Indicator Lamps | Power Indicator: Green LED Operation Indicator: Red LED Nixie Tube: Diagnostic display, Stable display |
| Connection Method | Cable lead-out type (Standard 5m), M12 connector |
| Ambient Temperature | Work：-10℃~+55℃(no condensation, no icing) Storage：-25℃~+70℃(no condensation, no icing) |
| Ambient Humidity | Work：35~85%RH (no condensation) Storage：35-95%RH (no condensation) |
| Light Interference Resistance | Incandescent lamp:Illuminance on the light-receiving surface below 5,000 lx |
| Withstand Voltage | AC 1000V, 50/60Hz for 1 minute (Between the whole charging part and the shell) |
| Insulation Strength | ＞ 20MΩ (DC500V megohmmeter) (Between the whole charging part and the shell) |
| Vibration Resistance | Durability: 10~55Hz double amplitude 1.5mm, 2 hours in X, Y, Z directions |
| Protection Class | IEC IP65 |
| Mounting Method | End caps with built-in mounting holes |
|
| Material | Shell | Aluminum alloy (Yellow) |
| Light-transmitting cover | PMMA |
| End caps | Engineering plastic |