| Beam Spacing | 20mm |
| Minimum Detectable Object | Opaque object ≥30mm |
| Detection Distance | 0.1~10mm |
| Output Method | 2*NPN、2*PNP |
| Light Source | Infrared light 850nm |
| Safety-related Characteristic Parameters | Type | Type 2 |
| Safety Integrity Level | SIL 2 |
| Performance Level | PL d |
| Operating Voltage | 24VDC±20% |
| Maximum Output Current | 250mA Max |
| Power Consumption | Transmitter: 2W, Receiver: 3W |
| Reset | Manual/Auto selectable |
| Circuit Protection | Power polarity protection, output short circuit protection, output overload protection |
| Indicator Lights | Power indicator: Green LED Operation indicator: Red LED Digital display: Diagnostic display, stable display |
| Connection Method | Wire lead type (standard 5m), M12 connector |
| Ambient Temperature | Work：-10℃~+55℃(no condensation, no icing) Storage：-25℃~+70℃(no condensation, no icing) |
| Ambient Humidity | Work：35~85%RH (no condensation) Storage：35-95%RH (no condensation) |
| Light Immunity | Incandescent lamp: Illumination ≤5,000Lx |
| Withstand Voltage | AC 1000V, 50/60Hz for 1 minute between live parts and enclosure |
| Insulation Resistance | ≥20MΩ (with DC500V megohmmeter) between live parts and enclosure |
| Vibration Resistance | Endurance: 10~55Hz, double amplitude 1.5mm, X, Y, Z directions for 2 hours each |
| Protection Class | IEC IP65 |
| Mounting Method | Mounting holes on end caps |
| Material | Housing | Aluminum alloy (yellow) |
| Light cover | PMMA |
| End caps | Engineering plastic |